Heat Detector
Showing all 13 resultsSorted by popularity
-
Heat Detector
Inim Conventional Heat Detector ID200
Inim Conventional Heat Detector ID200
- Newly designed optical chamber with sealed upper-part and 500 μm holes diameter mesh insect screen
- Bicolour LED: Red for alarm; Green slow flash for standby (optional) and fast flash for trouble (fault or high level of contamination in the optical smoke chamber)
- Drift compensation for sensor drift caused by dust in the chamber
- Sensitivity selection for smoke and heat (by means of EDRV1000 driver)
- Operating mode selection (by means of EDRV1000 driver for ID300 version): Only smoke; Only Heat; AND mode; OR mode; Plus mode
- Complete Diagnostics: view the contamination level in the optical chamber and verify real-time values (by means of EDRV1000)
- Memory of the smoke and temperature levels measured in the five-minute period prior to the last alarm detected
- Vast range of options (selected by means of EDRV1000 driver)
- Bypass plate on base guarantees continuity in the event of removal of the detector from the line
SKU: n/a -
Heat Detector, Addressable Fire System
Honeywell Addressable Photoelectric Smoke Detector
Honeywell Addressable Photoelectric Smoke Detector
- Â Low-profile design
- Â Common base for optical, ionization, and thermal sensors
- Â Addressable-analogue communication
- Â Stable communication technique with noise immunity
- Â Low standby current
- Â Rotary decade 01 to 99 address switches
- Â Remote LED output as standard
-  Dual LED design provides 360° viewing angle
-  Visible LED’s blink every time the detector is addressed (optional), and illuminate steady on alarm
- Â Built-in functional test switch activated by an external magnet
- Â Optional relay, isolator, or sounder bases
- Â LPCB approved
SKU: n/a -
Heat Detector, Addressable Fire System
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
Quick View
Heat Detector, Addressable Fire SystemHM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
- Wiring: 2 wires
- Operating Voltage: 24 VDC
- Dual LEDs – 360° vision
- Measurements: 9.9cm x 4.5cm (without base)
- Complies with European Regulations – EN54
SKU: n/a -
Heat Detector, Addressable Fire System
Zeta Addressable Heat Detector
Zeta Addressable Heat Detector
– Designed to meet EN54 requirement
– Lockable to base to stop unauthorized removal
– Remote LED output
– 8 LEDs for improved, 360° visibility
– Compatible with all Fyreye MkII bases
– Addressed with dip switches or hand-held Programmer
SKU: n/a -
Heat Detector, Addressable Fire System
Cooper Menvier CAH330 Intelligent Addressable Multi-Mode Heat Sensor
Quick View
Heat Detector, Addressable Fire SystemCooper Menvier CAH330 Intelligent Addressable Multi-Mode Heat Sensor
Cooper Menvier CAH330 Intelligent Addressable Multi-Mode Heat Sensor
- Soft addressed
- Integral short circuit isolator
- Single address
- Wide range of sensor types
- 360° visibility LED using lightpipe technology
- Drift compensation
- Removable detector chamber
- Aesthetically pleasing
SKU: n/a -
Heat Detector, Addressable Fire System
C-Tec Addressable Heat Detector
C-Tec Addressable Heat Detector
- A high-quality programmable heat detector for use with C-TEC’s XFP & ZFP ‘CAST’ protocol Addressable Fire Panels.
- LPCB certified to EN54-5 & 17 and Kiwa Telefication certified to EN54-13.
- Can be programmed to operate as a Class A1R (rate of rise), Class A2 (64ºC fixed temperature) or Class B (76ºC fixed temperature) heat detector. The default setting is A2.
- Onboard short circuit loop isolator.
- Includes two 8mm x 2mm ultra-bright red LED indicating strips.
- Different sensitivities can be selected for different times of the day (day/night, building occupied/unoccupied etc).
- 5mA typical alarm current (370uA typical quiescent) @ 22-40V DC.
- Programmable multi-function status LED.
- Compatible with C-TEC’s CA408 CAST base c/w integrated locking mechanism & ID tag.
SKU: n/a -
Heat Detector, Fire Detection System
Aico Ei630i Battery Heat Alarm
Aico Ei630i Battery Heat Alarm
- Heat sensor – responds to heat build-up from large flaming fires (triggers at 58°C)
- 10 year Lithium battery powered
- Easy to fit – twist on base and multi-fixings
- Grade F1
- Kitemarked to BS 5446-2:2003
- 5 year guarantee
SKU: n/a -
Heat Detector, Fire Detection System
Aico Ei3014 Heat Alarm
Aico Ei3014 Heat Alarm
- Contains a fast response Thermistor Heat sensor
- Mains powered with a 10-year rechargeable lithium cell back-up
- Add an Ei3000MRF SmartLINK module for wireless interconnection and data extraction
- Compatible with other Aico mains powered devices
- Built-in AudioLINK data extraction technology
- Grade D1 and compliant with Scottish legislation
- Supplied with an easi-fit base
SKU: n/a -
Smoke Detectors, Addressable Fire System, Fire Detection System, Heat Detector
Menvier Intelligent Addressable Sensor Bases
Quick View
Smoke Detectors, Addressable Fire System, Fire Detection System, Heat DetectorMenvier Intelligent Addressable Sensor Bases
Menvier Intelligent Addressable Sensor Bases
- Sensor shorting link
- Separate loop in and loop out terminals
- Stand off fixing feature
- Accepts side entry cables
- Selectable sensor locking feature
SKU: n/a -
Heat Detector, Addressable Fire System, Fire Detection System
C-Tec Addressable Heat Detector
Quick View
Heat Detector, Addressable Fire System, Fire Detection SystemC-Tec Addressable Heat Detector
C-Tec Addressable Heat Detector
- A high quality programmable heat detector for use with C-TEC’s XFP & ZFP ‘CAST’ protocol Addressable Fire Panels.
- LPCB certified to EN54-5 & 17 and Kiwa Telefication certified to EN54-13.
- Can be programmed to operate as a Class A1R (rate of rise), Class A2 (64ºC fixed temperature) or Class B (76ºC fixed temperature) heat detector. Default setting is A2.
- Onboard short circuit loop isolator.
- Includes two 8mm x 2mm ultra-bright red LED indicating strips.
- Different sensitivities can be selected for different times of the day (day/night, building occupied/unoccupied etc).
- 5mA typical alarm current (370uA typical quiescent) @ 22-40V DC.
- Programmable multi-function status LED.
- Compatible with C-TEC’s CA408 CAST base c/w integrated locking mechanism & ID tag.
SKU: n/a -
Heat Detector, Fire Detection System
Heat detector stand alone
Heat detector stand alone
- Electronic thermistor sensing technology (ZT-TH5)
- Easy installation and maintenance.
- Low-battery warning
- Test button verifies battery and alarm operation
- Loud alarm signal of exceeding 85 dB in alarm mode
- The power supply will be cut out automatically when removing the detector from the base
SKU: n/a
