Fire Detection System
Showing 1–16 of 20 resultsSorted by popularity
-
Smoke Detectors, Fire Detection System
Inim ED100 Optical Smoke Detector
Inim ED100 Optical Smoke Detector
The ED100 optical smoke detector is based on the Tyndall effect (diffusion of light) and provides firstrate early warning in the event of fire.
It offers wide-spectrum detection of smoke particles generated by the majority of fires. The newly designed optical chamber with sealed upper-part and 500 μm holes diameter mesh insect screen ensure high immunity to false alarms.
The sensitivity can be configured to suit a wide range of applications (sensitivity configurable as: 0.08dB/m; 0.10dB/m; 0.12dB/m; 0.15dB/m).
SKU: n/a -
Fire Panel, Conventional Fire System, Fire Detection System
INIM Conventional control panel with 4 zones expandable to 20
Quick ViewFire Panel, Conventional Fire System, Fire Detection SystemINIM Conventional control panel with 4 zones expandable to 20
INIM Conventional control panel with 4 zones expandable to 20
The SmartLine conventional fire-detection control panel series offers a 2 zone non-expandable model (SmartLine020-2), a 4 zone model expandable to 20 zones (SmartLine020-4) and a 4 zone model expandable to 36 zones (SmartLine036-4).
SKU: n/a -
Heat Detector, Fire Detection System
Aico Ei630i Battery Heat Alarm
Aico Ei630i Battery Heat Alarm
- Heat sensor – responds to heat build-up from large flaming fires (triggers at 58°C)
- 10 year Lithium battery powered
- Easy to fit – twist on base and multi-fixings
- Grade F1
- Kitemarked to BS 5446-2:2003
- 5 year guarantee
SKU: n/a -
Heat Detector, Fire Detection System
Aico Ei3014 Heat Alarm
Aico Ei3014 Heat Alarm
- Contains a fast response Thermistor Heat sensor
- Mains powered with a 10-year rechargeable lithium cell back-up
- Add an Ei3000MRF SmartLINK module for wireless interconnection and data extraction
- Compatible with other Aico mains powered devices
- Built-in AudioLINK data extraction technology
- Grade D1 and compliant with Scottish legislation
- Supplied with an easi-fit base
SKU: n/a -
Smoke Detectors, Fire Detection System
Aico Ei650i Battery Optical Alarm
Aico Ei650i Battery Optical Alarm
- Powered by a sealed 10-year lithium battery
- Built-in dust compensation technology
- Built-in AudioLINK+ technology
- Easy to fit with twist on base, multi-fixings and anti-tamper locking option
- Easy to use, large test button
- Grade F1 and Kitemarked to BS EN 14604:2005
SKU: n/a -
Smoke Detectors, Fire Detection System
Aico Ei3016 Optical Smoke Alarm
Aico Ei3016 Optical Smoke Alarm
- Contains our high-performance Optical sensor
- Mains powered with a 10-year rechargeable lithium cell back-up
- Add an Ei3000MRF module for wireless interconnection and data extraction
- Built-in AudioLINK+ data extraction technology
- Compatible with other Aico mains powered devices
- Built-in dust compensation with unique self monitoring mechanism
- Grade D1 and compliant with Scottish legislation
- Supplied with an easi-fit base
SKU: n/a -
Smoke Detectors, Addressable Fire System, Fire Detection System, Heat Detector
Menvier Intelligent Addressable Sensor Bases
Quick ViewSmoke Detectors, Addressable Fire System, Fire Detection System, Heat DetectorMenvier Intelligent Addressable Sensor Bases
Menvier Intelligent Addressable Sensor Bases
- Sensor shorting link
- Separate loop in and loop out terminals
- Stand off fixing feature
- Accepts side entry cables
- Selectable sensor locking feature
SKU: n/a -
Fire Panel, Addressable Fire System, Fire Detection System
Menvier Touch-screen Repeater Panel
Quick ViewFire Panel, Addressable Fire System, Fire Detection SystemMenvier Touch-screen Repeater Panel
Menvier Touch-screen Repeater Panel
- Plug and play. All information is downloaded through the network
- Touch-screen display
- Integrated network capability allows networking with the latest Menvier range of
- intelligent addressable fire alarm control panels
- Multi language capability
- Up to 126 repeaters can be connected to the network
- Programmable as an active or passive repeater
SKU: n/a -
Fire Panel, Addressable Fire System, Fire Detection System
Menvier Df6100 Range Intelligent Addressable Control Panel
Quick ViewFire Panel, Addressable Fire System, Fire Detection SystemMenvier Df6100 Range Intelligent Addressable Control Panel
Menvier Df6100 Range Intelligent Addressable Control Panel
- Large versatile touch screen display
- Competitive single or two loop system
- Spur tolerant soft addressing
- Large selection of compatible ancillaries
- Full network capability
- Integral battery and power supply
- 200 address capacity per loop
- Approved to EN54 Pt13 and EN54 Pt2 and Pt4
SKU: n/a -
Fire Panel, Addressable Fire System, Fire Detection System
C-Tec CFP Two Wire 2 Zone AlarmSense Control Panel
Quick ViewFire Panel, Addressable Fire System, Fire Detection SystemC-Tec CFP Two Wire 2 Zone AlarmSense Control Panel
C-Tec CFP Two Wire 2 Zone AlarmSense Control Panel
- LPCB certified to EN54 parts 2 and 4
- Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry to access level 2
- 2, 4 or 8 AlarmSense zone circuits (dependent on model purchased)
- Four conventional sounder circuits
- Integral 1.5A EN54-4/A2 compliant switch mode PSU
- Wide range of engineering functions including zone test, coincidence, zone delay and non- latching zones
- Two on-board relays (Fire and Fault)
- Two open-collector outputs (Remote and Reset)
- ‘Class change’ and alert inputs
- Installer-friendly design accommodates easy first fix and straightforward maintenance
- Attractive flush or surface mountable plastic lid and enclosure – no bezel required
- Low quiescent current
- Multiple indicators
- End of line units included (one per zone)
- Ancillary system expansion connections provided for up to eight two-wire repeaters (one CFP761 network driver card required per system) and optional CFP relay boards
- Space for two x 12V 3.3Ah VRLA batteries.
SKU: n/a -
Smoke Detectors, Addressable Fire System, Fire Detection System
C-Tec Addressable Smoke Detectors
Quick ViewSmoke Detectors, Addressable Fire System, Fire Detection SystemC-Tec Addressable Smoke Detectors
C-Tec Addressable Smoke Detectors
- Addressable Technology:Â These smoke detectors are equipped with addressable technology, allowing them to be individually identified and controlled within a fire detection system.
- Photoelectric Sensing:Â Many C-TEC addressable smoke detectors use photoelectric sensing technology, which is highly effective at detecting smoldering fires and the presence of smoke particles.
- Advanced Algorithms:Â They often feature advanced algorithms that can differentiate between genuine fire conditions and non-fire events, reducing the likelihood of false alarms.
- Built-In Sounders:Â Some models include built-in sounders that provide audible alerts locally at the detector, increasing the chances of early detection by occupants.
- Remote Monitoring:Â Addressable technology enables remote monitoring and control of the detectors, allowing for quick response and system management.
- Tamper Resistance:Â C-TEC addressable smoke detectors are designed to be tamper-resistant to prevent unauthorized interference or deactivation.
- Multiple Power Options:Â They can operate on various power inputs, including low voltage and mains power, offering flexibility in installation.
SKU: n/a -
Heat Detector, Addressable Fire System, Fire Detection System
C-Tec Addressable Heat Detector
Quick ViewHeat Detector, Addressable Fire System, Fire Detection SystemC-Tec Addressable Heat Detector
C-Tec Addressable Heat Detector
- A high quality programmable heat detector for use with C-TEC’s XFP & ZFP ‘CAST’ protocol Addressable Fire Panels.
- LPCB certified to EN54-5 & 17 and Kiwa Telefication certified to EN54-13.
- Can be programmed to operate as a Class A1R (rate of rise), Class A2 (64ºC fixed temperature) or Class B (76ºC fixed temperature) heat detector. Default setting is A2.
- Onboard short circuit loop isolator.
- Includes two 8mm x 2mm ultra-bright red LED indicating strips.
- Different sensitivities can be selected for different times of the day (day/night, building occupied/unoccupied etc).
- 5mA typical alarm current (370uA typical quiescent) @ 22-40V DC.
- Programmable multi-function status LED.
- Compatible with C-TEC’s CA408 CAST base c/w integrated locking mechanism & ID tag.
SKU: n/a -
Sounders, Fire Detection System
Asenware AW-CSS2166-5 Fire Strobe Sounder
Asenware AW-CSS2166-5 Fire Strobe Sounder
- Easy to install & wire
- The equipment has also issued two kinds of sound and flash an alarm signal, even people with disabilities can be a timely response to evacuate.
 Demerits:
- The automatic fire alarm system can not identify the specific location of the sound & light.
- Â Sounds kind is no debugging, only one alarm sound choices.
SKU: n/a -
Fire Panel, Conventional Fire System, Fire Detection System
Asenware 4 Zone Fire Alarm Control Panel AW-CFP2166-4
Quick ViewFire Panel, Conventional Fire System, Fire Detection SystemAsenware 4 Zone Fire Alarm Control Panel AW-CFP2166-4
Asenware 4 Zone Fire Alarm Control Panel AW-CFP2166-4
- AW-CFP2166 series conventional fire alarm panel is designed based on
EN54 part 2&4 standard.
2. It is modularized design, the panel can expand from 1Â zone to 32
zones easily.
3. It has 2 level control mode by a lock.
4. It has 24VDC power supply output.
5. It has FIRE and FAULT signal output.
6. It has 2Â general sounders output.
7. Each zone has 1Â circuit detectors input.
8. Each zone can be disable by a button.
9. It has RESET button to reset the panel.
10. It has SILENCE button to stop BUZZER and SOUNDERS.
11. It has EVACUATE button to start a manual fire alarm immediately.
12. It has an optional GSM module for fire alarm by SMS.
13. It is economic, user-friendly and easy maintenance.
SKU: n/a - AW-CFP2166 series conventional fire alarm panel is designed based on