Asenware AW-CSS2166-5 Fire Strobe Sounder
Availability:In Stock!
Asenware AW-CSS2166-5 Fire Strobe Sounder
- Easy to install & wire
- The equipment has also issued two kinds of sound and flash an alarm signal, even people with disabilities can be a timely response to evacuate.
Demerits:
- The automatic fire alarm system can not identify the specific location of the sound & light.
- Sounds kind is no debugging, only one alarm sound choices.
Asenware AW-CSS2166-5 Fire Strobe Sounder
Alienware AW-CSS2166-5 Conventional Fire Strobe Sounder is a conventional type sound and light alarm, sound and light for short.
The Fire Strobe Sounder is an automatic fire alarm system output devices, mainly through the alarm will sound and flash signal, suggesting that people fire.
Works by DC 24V electrical signal to the conventional type of sound and light alarms powered,
Equipment operation is stable & reliable
The Strobe sounder it sounds an alarm buzzer and flashing lights flash issue.
Fire Strobe Sounder is a kind of terminal device for alarm; it is used for the sound and light alarm when the fire happens.
Product Features
2. The main line end receives two main lines, No polarization
3. Connect the power end to DC24V power line.
| Model | AW-CSS2166-2 |
| Operating Voltage | Zone 24V |
| Operating current | ≤60mA |
| Alarm SPL | ≥85dB |
| Flash Period | 1 Time/Sec |
| Environmental | Temperature range: -5 to 40°C (23~104°F) Humidity: 5 to 95% RH, non-condensing |
| Protection class | IP30 |
| Materials and colors | ABS red |
| Application | For indoor use only |
| Mating Host | AW-CFP2166 fire alarm control panel |
| Size | 154mm* 115mm* 50.5mm |
| Weight | About 165g |
Based on 0 reviews
Be the first to review “Asenware AW-CSS2166-5 Fire Strobe Sounder”
Related products
-
Heat Detector, Addressable Fire System
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
Quick View
Heat Detector, Addressable Fire SystemHM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
- Wiring: 2 wires
- Operating Voltage: 24 VDC
- Dual LEDs – 360° vision
- Measurements: 9.9cm x 4.5cm (without base)
- Complies with European Regulations – EN54
SKU: n/a -
-
Heat Detector, Fire Detection System
Aico Ei630i Battery Heat Alarm
Aico Ei630i Battery Heat Alarm
- Heat sensor – responds to heat build-up from large flaming fires (triggers at 58°C)
- 10 year Lithium battery powered
- Easy to fit – twist on base and multi-fixings
- Grade F1
- Kitemarked to BS 5446-2:2003
- 5 year guarantee
SKU: n/a -
Heat Detector, Fire Detection System
Heat detector stand alone
Heat detector stand alone
- Electronic thermistor sensing technology (ZT-TH5)
- Easy installation and maintenance.
- Low-battery warning
- Test button verifies battery and alarm operation
- Loud alarm signal of exceeding 85 dB in alarm mode
- The power supply will be cut out automatically when removing the detector from the base
SKU: n/a -
Fire Extinguishers, Fire Suppression System
Throwing fire Extinguisher
Throwing fire Extinguisher
“Color Egg” throwable fire extinguisher is a special new designed product, throwing directly to work. Easy to use by all people, and quickly extinguish initial fire. It also can be used to create the escape route in fire.This product is suitable for home, school, office, hospital, hotel, shopping center, library, bus, train, car, bar, etc. It is not only a fire extinguishers, it is also can be used as an art decoration because of its rich color.
SKU: n/a
There are no reviews yet.