Sounders, Conventional Fire System
CTEC Conventional Hi-Output 100dB(A) Wall Sounder (deep base)
Availability:In Stock!
CTEC Conventional Hi-Output 100dB(A) Wall Sounder (deep base)
- Third-party certified to EN54-3 (Sounders).
- Impressive 100dB(A) sound output @ 1m.
- Includes 31 selectable primary tones and an optional secondary tone.
- Two volume levels (high and low)
- Alarm Current at 30Vdc = 5.5mA.
- Alarm Current at 18Vdc = 3.8mA.
- IP33C rated.
CTEC Conventional Hi-Output 100dB(A) Wall Sounder (deep base)
| Approvals/certifications | Certified to EN54-3 by the LPCB & VdS. |
|---|---|
| Protocol/compatibility | Compatible with C-TEC’s CFP, FP, MFP and EP203 conventional fire alarm panels and virtually all other makes (testing on third-party panels is recommended before use) |
| Application/operation | Designed to be wall mounted. Can be used in covered outdoor areas. |
| VAD category & coverage | N/A. |
| Flash rate & colour | N/A. |
| Supply/operating voltage | 18 to 30V DC. |
| Nominal SPL (Sound Pressure Level) | 100dB(A). |
| Alarm current | At 30Vdc: 5.5mA; At 18Vdc: 3.8mA. |
| Product dimensions (mm) | 114mm diameter x 132mm deep. |
| IP Rating | IP33C (Type B). |
| Weight | 315g. |
| Operating conditions/temperature | -10ºC to +55ºC. Max. 95% RH (Non-condensing). |
Based on 0 reviews
Be the first to review “CTEC Conventional Hi-Output 100dB(A) Wall Sounder (deep base)”
Related products
-
Heat Detector
Inim Conventional Heat Detector ID200
Inim Conventional Heat Detector ID200
- Newly designed optical chamber with sealed upper-part and 500 μm holes diameter mesh insect screen
- Bicolour LED: Red for alarm; Green slow flash for standby (optional) and fast flash for trouble (fault or high level of contamination in the optical smoke chamber)
- Drift compensation for sensor drift caused by dust in the chamber
- Sensitivity selection for smoke and heat (by means of EDRV1000 driver)
- Operating mode selection (by means of EDRV1000 driver for ID300 version): Only smoke; Only Heat; AND mode; OR mode; Plus mode
- Complete Diagnostics: view the contamination level in the optical chamber and verify real-time values (by means of EDRV1000)
- Memory of the smoke and temperature levels measured in the five-minute period prior to the last alarm detected
- Vast range of options (selected by means of EDRV1000 driver)
- Bypass plate on base guarantees continuity in the event of removal of the detector from the line
SKU: n/a -
Fire Panel, Conventional Fire System
Cooper Menvier FX2208CFCPD Conventional 8 Zone Control Panel
Quick View
Fire Panel, Conventional Fire SystemCooper Menvier FX2208CFCPD Conventional 8 Zone Control Panel
Cooper Menvier FX2208CFCPD Conventional 8 Zone Control Panel
- 8 zones panel
- Flexible, high specification system
- Surface or semi-flush mounting
- Simple “one-shot” auto-reset user test facility
- Maintenance free poly switch circuit protection, with auto reset
- Class change and programmable fire/fault relay as standard
SKU: n/a
There are no reviews yet.