Honda EG1000 Generator
| EG1000 | |
| AC Frequency | 50Hz |
| AC Output VOLTAGE | 230V |
| Rated AC output | 0.75kVA |
| Maximum AC output | 0.85kVA |
| Model | GX80 |
| Engine Type | Air cooled 4 stroke OHV single cylinder |
| Displacement | 79.7cc |
| Ignition system | Transistorized magneto |
| Starting system | Recoil |
| Continuous operational time | 6.7h |
| Fuel tank capacity | 3.6 Ltrs |
| Dimension (L*W*H) | 376 x 302 x 430mm |
| Dry weight | 22.6 kg |
| Noise level | 90 dB |
Based on 0 reviews
Be the first to review “Honda EG1000 Generator”
Related products
-
Heat Detector, Addressable Fire System
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
Quick View
Heat Detector, Addressable Fire SystemHM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
- Wiring: 2 wires
- Operating Voltage: 24 VDC
- Dual LEDs – 360° vision
- Measurements: 9.9cm x 4.5cm (without base)
- Complies with European Regulations – EN54
SKU: n/a -
Fire Extinguishers, Fire Suppression System
Cold Fire Extinguisher
Cold Fire Extinguisher
ColdFire is a kind of green and high efficient fire agent. And PRI-SAFETY also supply stainless steel Bottles and spare parts to All the ColdFire Distributors. ColdFire Extinguisher is high quality, and environmentally friendly fire extinguishing agent,cools 21 times faster than water, Used for Class A, B, D or K fires.
SKU: n/a -
Heat Detector
Inim Conventional Heat Detector ID200
Inim Conventional Heat Detector ID200
- Newly designed optical chamber with sealed upper-part and 500 μm holes diameter mesh insect screen
- Bicolour LED: Red for alarm; Green slow flash for standby (optional) and fast flash for trouble (fault or high level of contamination in the optical smoke chamber)
- Drift compensation for sensor drift caused by dust in the chamber
- Sensitivity selection for smoke and heat (by means of EDRV1000 driver)
- Operating mode selection (by means of EDRV1000 driver for ID300 version): Only smoke; Only Heat; AND mode; OR mode; Plus mode
- Complete Diagnostics: view the contamination level in the optical chamber and verify real-time values (by means of EDRV1000)
- Memory of the smoke and temperature levels measured in the five-minute period prior to the last alarm detected
- Vast range of options (selected by means of EDRV1000 driver)
- Bypass plate on base guarantees continuity in the event of removal of the detector from the line
SKU: n/a
There are no reviews yet.