Aico Ei650i Battery Optical Alarm
Availability:In Stock!
Aico Ei650i Battery Optical Alarm
- Powered by a sealed 10-year lithium battery
- Built-in dust compensation technology
- Built-in AudioLINK+ technology
- Easy to fit with twist on base, multi-fixings and anti-tamper locking option
- Easy to use, large test button
- Grade F1 and Kitemarked to BS EN 14604:2005
Aico Ei650i Battery Optical Alarm
Functioning as a standalone unit, the Ei650i Optical Alarm is best for detecting slow, smoldering fires commonly produced by electrical fires or flammable materials. This Optical Fire Alarm is best placed in the hallway, landing, living room, or dining room.
The Ei650i Optical Alarm is best for detecting slow, smouldering fires commonly produced by electrical fires or sofas and is less likely to react to cooking smells if fitted in the hallway next to the kitchen.
This battery powered alarm contains sealed in, tamper-proof lithium battery that will last for the full 10-year life of the alarm. The alarm is not powered until it is twisted on the mounting base, thus avoiding battery power consumption during storage and prior to installation.
Technical Specification
- Supply Type: Optical Chamber
- Battery: 3V Lithium Battery (non replaceable)
- Sound Level: 85 dB(A) at 3 metres
- Temperature: Operating -10 to 40°C
- Storage: 0 to 35°C (in a dry area)
- Humidity Range: 15% to 95% R.H. non condensing
- Button Test: Simulates the effect of smoke and checks chamber, electronics and horn
- Indicators: Red- Alarm, fault
- Plastic Material: UL 94 HB
- Dimensions: Product – 120mm(H) x 120mm (W) x 55mm(H)
- Weight: 182g
- Warranty: 5 year (limited) warranty
Based on 0 reviews
Be the first to review “Aico Ei650i Battery Optical Alarm”
Related products
-
Smoke Detectors, Addressable Fire System
Zeta Addressable Smoke Detector
Zeta Addressable Smoke Detector
- Addressed with dip switches or hand-held programmer
- Lockable to base to stop unauthorized removal
- Compatible with all Fyreye MkII bases
- Designed to meet EN54 requirement
- 8 LEDs for improved, 360° visibility
- Remote LED output
SKU: n/a -
Smoke Detectors, Conventional Fire System
Apollo Series 65 ionisation smoke detector(Conventional)
Apollo Series 65 ionisation smoke detector(Conventional)
- A high-quality ionisation smoke detector.
- Uses a low activity radioactive foil to detect fires by irradiating the air in the smoke chamber.
- Certified to EN54-7 by the LPCB.
- Wide 9-33V DC operating voltage.
- Red LED illuminates when the detector is in alarm.
- Requires a 45681-201APO diode base, 45681-200APO non-diode base or 45681-245APO relay base.
SKU: n/a -
Smoke Detectors
Apollo XP95 Ionisation Smoke Detector
Apollo XP95 Ionisation Smoke Detector
- Fully compatible with C-TEC’s XFP & ZFP XP95/Discovery Addressable Fire Panels.
- Uses a low activity radioactive foil to detect fires by irradiating the air in the smoke chambers causing a current flow. If smoke enters the chamber, the current flow is reduced leading to an alarm.
- Responds well to fast-burning, flaming fires.
- Designed to operate in a variety of environments.
- Red LED illuminates when the detector is in alarm.
- Certified to EN54-7 by the LPCB.
- Requires a 45681-210APO standard base or 45681-242APO low power relay base.
- ‘Xpert’ card addressed for speedy installation.
SKU: n/a -
Smoke Detectors, Fire Detection System
Inim ED100 Optical Smoke Detector
Inim ED100 Optical Smoke Detector
The ED100 optical smoke detector is based on the Tyndall effect (diffusion of light) and provides firstrate early warning in the event of fire.
It offers wide-spectrum detection of smoke particles generated by the majority of fires. The newly designed optical chamber with sealed upper-part and 500 μm holes diameter mesh insect screen ensure high immunity to false alarms.
The sensitivity can be configured to suit a wide range of applications (sensitivity configurable as: 0.08dB/m; 0.10dB/m; 0.12dB/m; 0.15dB/m).
SKU: n/a
There are no reviews yet.